·1 min read
6-Axis Robot Arm: Build Log
The build log of a 6-axis robot arm I'm putting together with metal brackets, 35 kg digital servos and a geared gripper. The project is still at an early stage.
Mission specs
- Stage
- Mechanical assembly and first servo tests
- Mechanics
- Metal servo brackets, an aluminium spacer, a geared gripper
- Servos
- 35 kg digital servos at the base and shoulder, a DS3218MG at the wrist
- Test rig
- Arduino UNO, a PCA9685 16-channel servo driver, a joystick and a 5 V bench supply
Mission log
Every change to the project is logged here with its date, newest first.
- Assembly
Project page opened. The base, arm segments, wrist and geared gripper are assembled; first servo tests were done with an Arduino UNO and a PCA9685. This page will grow as the scope takes shape.
Image records
Assembly log
Next steps
- Finishing the mechanical assembly and cable routing
- Servo control software
Technical report
Architecture, hardware and software in detail.
Still under construction
This page is the build log of the 6-axis robot arm I'm working on. The project is at a very early stage: mechanical assembly is under way and the scope isn't settled yet. So for now I'm only sharing what's been done; I'll expand this page as the control software and the arm's purpose take shape.
🔩 So far
- First servo tests: I tried the servos with an Arduino UNO and a PCA9685 16-channel servo driver, driven from a joystick.
- Base and shoulder: the base and shoulder joints carry the most load, so they got 35 kg-torque digital servos, each tested on its own with a 5 V bench supply.
- Arm and wrist: metal brackets and an aluminium spacer extend the arm; the wrist uses a DS3218MG.
- Gripper: a geared gripper sits at the end of the arm.
Photos of the assembly are in the image records at the top of this page.
🧭 What's next
- Finish the mechanical assembly and cable routing
- Write the servo control software
The arm also has a playable simulation in the workshop of the SMT-22 station; as the real arm starts moving, I'd like to bring the two closer together.